Shield RMSc pēdas nospieduma standarts

Kuru kolimatori jūs varēsiet uzstādīt uz stiprinājuma ar RMSc vai Shield RMSc pēdas nospiedumu? Vai jūs varēsiet uzstādīt Sig Sauer Romeo Zero uz tās pašas plāksnes kā Shield RMSc? Šajā rakstā mēs aptveram pilnu Shield RMSc pēdas nospieduma saderību.
Ko nozīmē "pēdas nospiedums"? Termins pēdas nospiedums attiecas uz optiskās ierīces pamatnes kontaktligzdu un skrūvju caurumu struktūru.
Un ko tas nozīmē, ja pēdas nospiedumi ir saderīgi?
Katrai optiskajai tēmēklim ir kāda pamatne uzstādīšanai. Pamatne sastāv no tapām dažādās pozīcijās un skrūvju caurumiem, kas tiek izmantoti tēmēkļa nostiprināšanai pie stiprinājumiem. Ja jebkuras divas tēmēkļi izmanto vienu un to pašu pamatni uzstādīšanai, mēs sakām, ka tām ir vienāds pēdas nospiedums.
Šajā rakstā mēs parādām, kuras kolimators tēmēkļi dalās ar vienādu pēdas nospiedumu.
Shield RMSc pēdas nospiedums sastāv no četrām kontaktligzdām tēmēkļa stūros un diviem skrūvju caurumiem tēmēkļa aizmugurē.
Priekšējās kā arī aizmugurējās kontaktligzdas ir 17mm / 0.66 collas attālumā viena no otras. Attālums no aizmugurējām kontaktligzdām līdz priekšējām kontaktligzdām ir 32,8mm / 1.29 collas. Šo četru kontaktligzdu pozīcija atbilst tapu pozīcijai, kas atrodas uz jebkura šī standarta stiprinājuma virsmas.
Skrūvju caurumi atrodas optiskās ierīces aizmugurējā daļā. Tie kalpo tēmēkļa nostiprināšanai pie stiprinājumiem. Šie divi skrūvju caurumi ir 14mm / 0.55 collas attālumā viens no otra.
Skrūves, kas jāizmanto šiem skrūvju caurumiem, vienmēr ir iekļautas komplektā ar tēmēkli.
RMSc pēdas nospiedumu dalās daudzi citi ražotāji tirgū.
Zemāk jūs varat atrast pilnu sarakstu ar kolimators tēmēkļi, kas darbosies ar Shield RMSc pēdas nospiedumu.
Shield RMSc standard
Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle kolimators
Vector Optics Frenzy-S 1x17x24 MIC
Sightmark Mini Shot A-Spec M3 Micro Refleksa Tēmēklis kolimators
Vector Optics Frenzy-S 1x17x24 SAS
Tas ir atkarīgs no tā, kādu ierīci vēlaties uzstādīt.
Ir daudz dažādu bāzu kolimators tēmēkļi, bet citi visbiežāk sastopamie ir šādi:
E' un prodotto valido, ben realizzato, ma ho dovuto spingere un pò per farlo entrare in sede, tuttavia senza grandi problemi. Ottimo rapporto qualità-prezzo.
Grazie
Die Platte passt perfekt. Bei der Abwicklung des Kaufes und bei der Lieferung hat alles super funktioniert. Vielen Dank
I spent A LOT of time researching the Nocturne- C and my new Shadow 2 carry so I can help the community learn. As you can see here, even most STAFF don’t know or care enough to say so… go to Night Fision and use the “p-series” (pictured below). Its time we start punishing these companies for not knowing their own products, sharing the information we have with each other, and finding a dealer that offers the best quality and price to us the FIRST time. Do NOT use this company or give them your money.
To clarify the situation - you asked us 2 days ago 'whether the p-09 nocturne sights will work on shadow 2 carry'.
We responded that they will not work.
You wrote back in similar manner as here (that is - very pasionately) that we advised wrongly.
But we did not advise wrongly. Why? Because although the sights are the same dovetail cut, they are different heights. So if you install Nocturne or Sig P320 sights on Shadow 2 Carry, they will technically fit, but on shooting range you will soon discover that you shoot higher than you are supposed to, when using such sights. The reason is that Carry has front sight 0.5mm lower.
In short - we advised you correctly because we were dealing with this question already too many times and knew the answer. Else we would not advise.
We are amazed that you decided to write us bad review because of our advise, but that is up to you.
Wish you well and if any further compatibility question, just let us know.
Thank you!
My order was not fulfilled and you have failed to respond to my inquiry. I expect a refund asap. Thanks
Hello,
I checked your order and it was dispatched the same day as ordered. It appears UPS was trying to contact for your import procedures but unsucessfully so it was not delivered. Also I could not have found any email from you regarding the shipment. Please write us at info@optics-spot.com and we will resolve
Thank you!
Solid, fits perfect.
I use Vector Optics Frenzy-X 1x24x29 GenII 6MOA Red Dot (SCRD-76) on my CZ Shadow 2 OR
Its perfect.
Thank you!
Thank you!
Thank you!
Thank you!
Thank you!
Very good mount. Fits perfectly a Trijicon RMR red dot and a picatiny rail, without any play at all, the provided screws are of good quality. Just a perfect item at a very reasonnable price :-)
Thank you!
passt perfekt für die Glock 17 Mos und das Osight SE,
habe es sonst nirgends gefunden. Klare Kaufempfehlung
Danke schön!
Thank you!
Thank you for review! Unfortunately with some guns fitting is required. Most often it is resolved easily by removing little bit of the material from the bottom of the red dot mount. It because most guns have some tollerances. Sometimes the tollerances are higher, and then the mounts have difficult time sliding in without slight material removal on the side of mount.
Glad you were able to resolve and the product serves now.
Apmeklējiet mūsu atbalsta centru
Ekspertu palīdzība un konsultācijas
Pārbaudiet savu pasūtījuma statusu
Atjauninājumi un izsekošana
Preču atgriešana un apmaiņa
Viss, kas jums jāzina
Cenu atbilstības garantija
Mūsu solījums jums
CZ Shadow 2 Optics Ready plate | Leupold Delta Point Pro
Absolutely excellent quality
E' un prodotto valido, ben realizzato, ma ho dovuto spingere un pò per farlo entrare in sede, tuttavia senza grandi problemi. Ottimo rapporto qualità-prezzo.
Grazie